Yellow Bullet Forums

Yellow Bullet Forums (https://www.yellowbullet.com/forum/index.php)
-   Turbo Charged - Precision Turbo & Engine (https://www.yellowbullet.com/forum/forumdisplay.php?f=20)
-   -   Thoughts on this cam? (https://www.yellowbullet.com/forum/showthread.php?t=2583305)

regalguy 06-24-2019 06:43 PM

Thoughts on this cam?
 
Street car 363 sbf turbo deal efi e85 roughly 2k miles a month.
Just donít wanna have valve train issues.pros and cons also
Would be appreciated ,or any suggestion on a cam looking to make 12 to1300 whp goal on full boost at track.90 percent street 10 percent track.
Canít figure out how to post pic of cam card.i can email
It if somebody would post it for me.
Thanks

regalguy 06-24-2019 11:14 PM

Re: Thoughts on this cam?
 
[QUOTE=regalguy;71029835]Street car 363 sbf turbo deal efi e85 roughly 2k miles a month.
Just donít wanna have valve train issues.pros and cons also
Would be appreciated ,or any suggestion on a cam looking to make 12 to1300 whp goal on full boost at track.90 percent street 10 percent track.
Canít figure out how to post pic of cam card.i can email
It if somebody would post it for me.
Thanks

TurboII 06-25-2019 12:14 AM

Re: Thoughts on this cam?
 
You can't post them directly. Upload them to a site like photobucket. Then right click on the pic and select copy type ==Direct. Then click on photo icon in your thread post window and click paste. Be sure it only has the pics host address in the pic icon window or it will not work properly. I hope this makes sense.

tempname 06-25-2019 10:25 AM

Re: Thoughts on this cam?
 
Or just write out the specs in a post.

427f2 06-25-2019 06:33 PM

Re: Thoughts on this cam?
 
I am assuming 88 turbo?
I may have some cam specs that I can share that I know are working
on a very similar combo.

And yes pics here are a pain....you have to upload them to a photo site
like imgur and then link it from there. Took me a while to figure it out.

regalguy 06-25-2019 08:25 PM

Re: Thoughts on this cam?
 
Adv dur intake 294 exhaust 298
At 50 261 265
Lift 753 753
On 115

3pedals 06-25-2019 08:50 PM

Re: Thoughts on this cam?
 
Quote:

Originally Posted by regalguy (Post 71035303)
Adv dur intake 294 exhaust 298
At 50 261 265
Lift 753 753
On 115

2000 miles a month! You can get it done with alot smaller cam that will be happier while your driving those 2000 miles

Bowtie Man 06-25-2019 09:09 PM

Re: Thoughts on this cam?
 
That's a lot of .050's.

Cautoworks 06-25-2019 10:05 PM

Re: Thoughts on this cam?
 
big ass cam for those goals...
my 388 has a 250 @.050 .650 lift on 116 makes near 1k. pac 1326 springs in at 1.975 300 over nose.

regalguy 06-25-2019 10:10 PM

Re: Thoughts on this cam?
 
Quote:

Originally Posted by Cautoworks (Post 71035815)
big ass cam for those goals...
my 388 has a 250 @.050 .650 lift on 116 makes near 1k. pac 1326 springs in at 1.975 300 over nose.

Thatís was my thoughts also.
This one has pac 1330 springs and already broke 1 of them never been above 3k rpm new motor

tempname 06-26-2019 04:02 AM

Re: Thoughts on this cam?
 
If you don't want valve trane issues on the street, that isn't your cam choice.


All times are GMT -4. The time now is 06:44 PM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 0%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Yellow Bullet LLC


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.