Yellow Bullet Forums

Yellow Bullet Forums (https://www.yellowbullet.com/forum/index.php)
-   Turbo Charged - Precision Turbo & Engine (https://www.yellowbullet.com/forum/forumdisplay.php?f=20)
-   -   Post up your turbocharged engine bay!! (https://www.yellowbullet.com/forum/showthread.php?t=51574)

the358bansh 04-07-2008 11:08 PM

Not much of an engine bay per se, but it gets the job done...
http://i210.photobucket.com/albums/b...Schmo62/11.jpg
http://i210.photobucket.com/albums/b...Schmo62/10.jpg

LV GN 04-07-2008 11:25 PM

[QUOTE=redvictor;774727]
Quote:

Originally Posted by LV GN (Post 774693)
Thanks.I have been on here for a while.I guess i haven't posted in here for a few months...

do you have a photo of the car with the nose on? you have done some very nice work!

LV GN 04-07-2008 11:28 PM

Quote:

Originally Posted by ozone eater (Post 774850)
how are u guys posting pictures. i dont know what my http address is?

you need to post photos to a place like streetfire.com and then link to it!

radialcoupe 04-08-2008 12:09 AM

Quote:

Originally Posted by Bridge Racing (Post 774851)
First is a 2004 Mustang, 5.4L Mod Motor, stock suspension car running an 88mm turbo (NMRA Drag Radial)

http://www.bridgeracing.com/bm07424.jpg


Second is a 2000 Mustang, 4.6L Mod Motor, stock suspension car running an 85mm turbo (NMRA Drag Radial).

http://www.bridgeracing.com/pap19.jpg

joey, what do those cars weigh with no ballast, and whats the lightest you think they can get? big props on working the mod motors.

chris

Jeffery Dunn 04-08-2008 01:48 AM

This is a friends car...http://JaDunnit-Studios.smugmug.com/...25_AcJ26-M.jpghttp://JaDunnit-Studios.smugmug.com/...71_aZZGN-M.jpg

redvictor 04-08-2008 03:51 AM

Quote:

Originally Posted by John Cunningham (Post 774794)
you gotta quit copying me RV! :)

didn't know i was John..:-D

redvictor 04-08-2008 03:54 AM

[QUOTE=LV GN;775230]
Quote:

Originally Posted by redvictor (Post 774727)
do you have a photo of the car with the nose on? you have done some very nice work!

www.redvictor1racing.co.uk or www.altiss.com or http://www.youtube.com/watch?v=YtxfbxGz1u4
thanks again....

Bridge Racing 04-08-2008 11:36 AM

Quote:

Originally Posted by radialcoupe (Post 775315)
joey, what do those cars weigh with no ballast, and whats the lightest you think they can get? big props on working the mod motors.

chris

The white 5.4L weighs 2980 lbs with me in it (175 lbs) with zero ballast. She has all factory panels, factory steering assembly.

The red 4.6L weighs 3050 lbs with me in it and zero ballast. This one is the same as far as all factory panels, steering.
She also still has the factory wheels tubs, spare tire area, etc.

Since we run the 85 mm on the 4.6L we add about 100 lbs of ballast to make the BFG radials work.

The 5.4L combo is running the 88mm so she has to weigh in at about 3280.

97turbocobra 04-09-2008 01:31 PM

here you go
http://www.topendfabrication.com/gal...serialNumber=3

nick97ta 04-09-2008 09:23 PM

the358bansh- that is one cool pic in you're sig. I love 62's....

and to everyone else- everyone's engine bays look awesome.

gilsbachracecraft 04-12-2008 03:41 PM

Just finished some updates on Robert & Steve Crissafulli's outlaw 10.5 TA
500+ ci Billet Small block
ProMod 90mm billet turbos
http://i237.photobucket.com/albums/f...i/DSC03291.jpg
http://i237.photobucket.com/albums/f...i/DSC03277.jpg
http://i237.photobucket.com/albums/f...i/DSC03297.jpg
http://i237.photobucket.com/albums/f...i/DSC03289.jpg

Dustin11 04-12-2008 04:07 PM

Rob and Steve's ride is f'in sweet. It's a bigger bore space I guess with some type of canted valve head??

redvictor 04-13-2008 04:35 AM

Quote:

Originally Posted by gilsbachracecraft (Post 785609)

Looks very trick dude.... Are those windows for the turbos ducted to the impellers or are they just show?

Mark Kasperan 04-13-2008 08:09 AM

6 Attachment(s)
Billy very nice, has this car run any where?

gilsbachracecraft 04-13-2008 06:32 PM

Quote:

Originally Posted by redvictor (Post 786315)
Looks very trick dude.... Are those windows for the turbos ducted to the impellers or are they just show?

They function.I formed the rings and extended them about 6" in alum.Rolled a ring just in front of the turbo and mounted it to the frontend support.Connected the two with a tape mold and wrapped it in glass.Made for a nice transition to the turbo inlet.

Mark,the last race they ran was Orlando 06.They have been testing since then but have to work around Frank Gugliotta's IHRA schedule since he drives it.They also had some problems with a cylinder dropping when they let the clutch pedal out.Something to do with a bad board in the injection box.Took a long time to get it repaired.They should be ready to rock now.

Dustin your right,it is a spread bore CN small block with a prostock truck style head.Definitely a cool piece.
http://i237.photobucket.com/albums/f...cture007-1.jpg
http://i237.photobucket.com/albums/f...cture001-2.jpg


All times are GMT -4. The time now is 06:50 AM.

Powered by vBulletin® Version 3.8.8
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Resources saved on this page: MySQL 0%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2019 DragonByte Technologies Ltd.
Yellow Bullet LLC


Garage Plus vBulletin Plugins by Drive Thru Online, Inc.