Yellow Bullet Forums banner

anyone running a whipple 5.0l blower

1K views 4 replies 2 participants last post by  GIT-R-DONE 
#1 ·
I would like to know if anyone is running it and or what it will take to run.
 
#5 ·
emailed them about it, the 305R blower which is a top inlet blower can produce 3300 cfm at 18000 rpm with aluminum rotors. The blower can be purchased with the magnesium rotor option which will allow it spin upwards of 22000 rpm but is a $3000 option. Cost on the 305R is blower with it's adapter plate(alows it to bolt to a roots blower intake) and the idle bypass system is $6550 black or $6950 polished. You will still need to purchase a snout, idler assembly, pullies, belt. Gets pricey in a hurry
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top