|07-22-2008, 02:28 AM||#1|
Join Date: Apr 2007
Location: West Oz
REV or Ferrea valves.
I have the choice of either valve,the Ferrea competition series or the REV race series valves. The Ferrea is 14 degree and the REV is 12 degree.
I have used the REV CL series in the past and they look like a nice piece.
I am leaning towards the REV because i cam get them in the exact size i need for a new set of CHI's i am going to do.
The Ferrea needs cutting down a little from 2.19 to 2.15.
Is the REV as good as the Ferrea??
|07-22-2008, 05:29 AM||#2|
Smoked another BBC
Join Date: Mar 2006
Location: Temp location. In a bed in McKinney, Tx. Call anytime on Cell 972-464-7400
Stealth Titanium is the most quality I have seen in a Ti Valve.
PayPal and reg email addy
Ed-vanced Engines & Performance
Temp mail addy
600 Frisco Rd,
McKinney, Tx 75069
WD direct for
BRC Performance (pistons,rods,cranks)
Pure Power Lifetime Billet machined Oil Filters
PAC Racing Springs
Total Seal Rings
Manton Engineering (valve train parts)
Titan Products (oil pumps etc)
Williams Performance (custom billet pans and valve covers)
GRP alum rods
|07-22-2008, 05:42 AM||#3|
Smoked Another SBC
Join Date: May 2007
Location: virginia beach, VA
as long as you use the upper series of Rev valves they are great, ..
Race Flow Development