Yellow Bullet Forums banner

Lets play Spec a SBF cam

908 views 1 reply 2 participants last post by  Mark302 
#1 ·
306 SBF,Edelbrock Perf. RPMs,Track Heat,
70 mm TB/75 mm MAF, 30 lb inj,9.73 to 1 comp,
AOD-E,9.5 conv,4.10s,10x26s or 275/60 DRs, shift point 62-6400.1.5/8 shorties,2.5 xpipe with rails.Will have a 125 to 150 shot,3250 lbs wet.

Want to see what you think for a hyd roller vs cam companies,
just curious.
 
#2 ·
The cam I just took out of my car would work really nice.The cam is duration @0.050 231/238 Lift .579/.592 on a 114 Hydralic roller.It is a street car but mostly a track car. Maybe a little less lift but these specs are with 1.7s.
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top