Yellow Bullet Forums banner

throttle cable setup Wilson throttle body

2K views 1 reply 1 participant last post by  Qwik_SN95 
#1 ·
Just picked up a 105mm Wilson TB. Theres no ball for the stock cable to hook to so what is everyone using? Boosted application also. TB is in the stock location with a hogan sheetmetal upper. Also the throttle bracket is mounted to the shaft at a different pitch then a regular Fox TB so ill probably have to run the cable through the center of the runners. Theres a gap there so thats no issue.

Thanks in advance
 
This is an older thread, you may not receive a response, and could be reviving an old thread. Please consider creating a new thread.
Top