Mounting the Holley Touch Screen In a Foxbody (pic) - Yellow Bullet Forums

Go Back   Yellow Bullet Forums > Technical Section > Electrical - Hyperaktive Performance Solutions

Electrical - Hyperaktive Performance Solutions

Reply
 
Thread Tools Display Modes
Old 05-01-2012, 04:37 PM   #1
Novi357
Senior Member
Smoked another BBC
 
Join Date: Nov 2007
Posts: 2,088
Default Mounting the Holley Touch Screen In a Foxbody (pic)

I thought this was a decent idea for how to mount the touch screen.

The touch screen is too tall to fit into a foxbody gauge cluster without some modification so I cut a space into the top of the stock instrument bezel and slid the touchscreen up into it.

This is how it turned out:

__________________
8.87 @ 161 on 17 inch rims
It only looks like a 13 second car

Novi357 is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 05-01-2012, 05:02 PM   #2
gray86hatch
Senior Member
Smoked another BBC
 
gray86hatch's Avatar
 
Join Date: Oct 2006
Location: Battle Creek Mi
Posts: 3,917
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

That looks good.
Mine is velcroed to the dash left of center.

Tim
__________________
86 mustang 3000lb
454 FTI LS3 Mast intake FTI hyd roller Holley EFI 275 MT e85
9.24 143.58 1.33 3.73 5.84 116.21
HR Drag Week 2013 ss-BB-NA Winner

LSX here we come
with help from
My wife and daughter's 2
www.flowtechinduction.com
www.boozebrothersracing.com
gray86hatch is offline   Reply With Quote
Old 05-01-2012, 05:43 PM   #3
RUN-NE1
Member
Pullin gears
 
Join Date: Dec 2008
Location: Lees Summit MO
Posts: 977
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

I havent figured out how to do mine. I was going to do a stand with quick release on it. Gauges on it look sick though.
__________________
'91 Mustang Dry Plate EFI 427 pump gas. Going for low low 9's N/A. Ultra Street/Dragweek/8.5" car
Holley EFI
RDI Aluminum 9.2" 427"
7721 Old Kuntz heads
55mm nitrous cam .903 lifters
TEA 2828 2000cfm Tbody
-4 dry nitrous plate class
5.5's@128 3100# on 8.5's

Mostly spare parts I have ran across.

Broke on 2011 Dragweek middle of BFE Texas.
Registered for 2014 Dragweek.
RUN-NE1 is offline   Reply With Quote
Old 05-01-2012, 10:18 PM   #4
joshgn
Junior Member
Spooled up
 
joshgn's Avatar
 
Join Date: Nov 2007
Location: Edmond,OK
Posts: 234
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

i mounted my xfi dash the same way...
__________________
-josh
joshgn is offline   Reply With Quote
Old 05-02-2012, 01:40 AM   #5
Danny Cabral
Senior Member
Smoked another BBC
 
Danny Cabral's Avatar
 
Join Date: Jan 2010
Location: Ellington, CT
Posts: 1,725
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

This is how I installed my TSLCD:
http://www.chevytalk.org/fusionbb/sh...hp?tid/254964/
__________________
May God's Grace Bless You

'78 BRONCO: 508" stroker, TFS heads, Dominator MPFI & DIS, cold air induction, dual 3" exhaust/Magnaflow mufflers, 100HP progressive dry direct-port NOS, A/C, Lentech Strip Terminator wide-ratio AOD, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, custom traction bars, 4" lift, 35" mud tires
Danny Cabral is offline   Reply With Quote
Old 05-04-2012, 06:05 AM   #6
holyshift
Senior Member
Smoked Another SBC
 
holyshift's Avatar
 
Join Date: Nov 2009
Location: Sandusky,OH
Posts: 6,404
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

That is cool as hell.
__________________

Long rod 308,all forged,4r70w,Nitrous.
Yea Dude Racing,Big Kid Racing
Best ET:10.75@123 1.44 60'
Ride with me http://youtu.be/IxZnUVjoJbM
http://www.facebook.com/pages/Yea-Du...12933502113677
Gearheadfurniture>>https://www.facebook.com/pages/Motor...92207797521680
IBEW Local 129 Apprentice
holyshift is offline   Reply With Quote
Old 05-04-2012, 09:02 AM   #7
Novi357
Senior Member
Smoked another BBC
 
Join Date: Nov 2007
Posts: 2,088
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

Quote:
Originally Posted by holyshift View Post
That is cool as hell.
Thanks. I drove around a little yesterday so I am still learning the system. The touch screen is going to be a great piece to have instead of always lugging a laptop around.
__________________
8.87 @ 161 on 17 inch rims
It only looks like a 13 second car

Novi357 is offline   Reply With Quote
Old 05-04-2012, 03:06 PM   #8
gray86hatch
Senior Member
Smoked another BBC
 
gray86hatch's Avatar
 
Join Date: Oct 2006
Location: Battle Creek Mi
Posts: 3,917
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

I agree

I have not had the laptop hooked up to mine at all on the street. Just doing data and changes at the track.

If I need to change something the touch screen will allow most basic stuff

Tim
__________________
86 mustang 3000lb
454 FTI LS3 Mast intake FTI hyd roller Holley EFI 275 MT e85
9.24 143.58 1.33 3.73 5.84 116.21
HR Drag Week 2013 ss-BB-NA Winner

LSX here we come
with help from
My wife and daughter's 2
www.flowtechinduction.com
www.boozebrothersracing.com
gray86hatch is offline   Reply With Quote
Old 05-04-2012, 04:20 PM   #9
Danny Cabral
Senior Member
Smoked another BBC
 
Danny Cabral's Avatar
 
Join Date: Jan 2010
Location: Ellington, CT
Posts: 1,725
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

I've been informed that the pictures in my above link, don't always work, so here's a quote from it:
Quote:
Originally Posted by Danny Cabral
This is how I mounted my Holley EFI Touchscreen LCD. The beauty of the PanaVise "mobile electronics mounting" pedestal is, I can swivel the TSLCD 360 (limited to the slack in the wire harness). I can swivel it up, down, toward the driver or passenger. I custom made the horizontal strut for vibration support. The other cool thing is, the PanaVise top mounting pad has the same bolt pattern as the Holley TSLCD center four threaded holes! That's nice for a quick and easy installation. Shorter pedestals and windshield suction mounts are available too. I'm glad the 5-wire harness is very long because I didn't have to lengthen it to reach the EFI harness.

5 wires:
2 CAN BUS
1 battery +
1 battery -
1 switched 12V

PanaVise web pages:
http://www.panavise.com/index.html?p...qskudatarq=145
http://www.panavise.com/index.html?p...ECTIONSword=ww
http://www.panavise.com/index.html?p...ECTIONSword=ww









http://www.holley.com/553-103.asp (Touchscreen LCD)
http://www.holley.com/data/Products/...R10524rev2.pdf (TSLCD Manual)
__________________
May God's Grace Bless You

'78 BRONCO: 508" stroker, TFS heads, Dominator MPFI & DIS, cold air induction, dual 3" exhaust/Magnaflow mufflers, 100HP progressive dry direct-port NOS, A/C, Lentech Strip Terminator wide-ratio AOD, 3:1 Atlas II, modified Dana 44/60-lockers-4.10s, hydroboost/4-disc brakes, ram-assist/heim joint steering, Cage long radius arms, custom traction bars, 4" lift, 35" mud tires
Danny Cabral is offline   Reply With Quote
Old 05-04-2012, 09:32 PM   #10
calypso50kid
ER NURSING
Smoked Another SBC
 
calypso50kid's Avatar
 
Join Date: Aug 2010
Location: khanton
Posts: 4,653
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

I like it but I personally would make a shroud to go around it to block off the factory cluster, would look clean like the race pak dash installs that way.You should get a removeable wheel you you have better access to it.
__________________
Quote:
Originally Posted by Chris Uratchko View Post
Big Block? Hell no, big blocks are for dump trucks.

Its all about the team baby. Work them hard and thank them often.
7.94@171.09 3145lbs. Cast Intake, single four.

MY Interview on tv from Milan dragway. http://vimeo.com/103355970

585ci texas prostock power
URATCHKO RACING ENGINES
SLICK RICK RACING HEADS
SKINNY KID RACE CARS
calypso50kid is offline   Reply With Quote
Old 05-04-2012, 10:02 PM   #11
geddy2112
Junior Member
Launchin
 
geddy2112's Avatar
 
Join Date: Jan 2008
Location: Bayport, Long Island
Posts: 384
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

different interior and touch screen but it works in my car. The thing is, when you have these touch screens, you don't even need the gauges anymore. I just wired my fuel level to my touch screen.

__________________
Dart 347,78GTS turbo,TH400,FAST XFI,3.27, E85.
geddy2112 is offline   Reply With Quote
Old 05-04-2012, 10:05 PM   #12
gray86hatch
Senior Member
Smoked another BBC
 
gray86hatch's Avatar
 
Join Date: Oct 2006
Location: Battle Creek Mi
Posts: 3,917
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

__________________
86 mustang 3000lb
454 FTI LS3 Mast intake FTI hyd roller Holley EFI 275 MT e85
9.24 143.58 1.33 3.73 5.84 116.21
HR Drag Week 2013 ss-BB-NA Winner

LSX here we come
with help from
My wife and daughter's 2
www.flowtechinduction.com
www.boozebrothersracing.com
gray86hatch is offline   Reply With Quote
Old 05-04-2012, 10:47 PM   #13
FNFAST
Junior Member
Pre-Staged
 
FNFAST's Avatar
 
Join Date: Jul 2009
Posts: 69
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

This is how it looks now.

I had also came up with this mount. I haven't really decided its final resting place. I'm going to try it in the dash also.

FNFAST is offline   Reply With Quote
Old 10-07-2013, 06:15 PM   #14
Sickfox
Member
Pullin gears
 
Sickfox's Avatar
 
Join Date: Oct 2012
Location: Fla / Ct
Posts: 524
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

Quote:
Originally Posted by FNFAST View Post
This is how it looks now.

I had also came up with this mount. I haven't really decided its final resting place. I'm going to try it in the dash also.



I like this idea, would like to see it finished.




Sickfox
__________________
89 YSI Notch

Thanks to,,

Racecraft Suspension
NBS Fabrication
FB Performance
Nelson Engines
Freezy 74
Alky Controls
Holley Dominator

MMFF July 2013 Cover Car
MMFF 2013 Top 10 Car
Sickfox is offline   Reply With Quote
Old 10-10-2013, 02:54 PM   #15
Sickfox
Member
Pullin gears
 
Sickfox's Avatar
 
Join Date: Oct 2012
Location: Fla / Ct
Posts: 524
Default Re: Mounting the Holley Touch Screen In a Foxbody (pic)

Bump.
__________________
89 YSI Notch

Thanks to,,

Racecraft Suspension
NBS Fabrication
FB Performance
Nelson Engines
Freezy 74
Alky Controls
Holley Dominator

MMFF July 2013 Cover Car
MMFF 2013 Top 10 Car
Sickfox is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -4. The time now is 12:04 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
Resources saved on this page: MySQL 2.94%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Yellow Bullet LLC