4.6 2valve cam suggestions - Yellow Bullet Forums

Go Back   Yellow Bullet Forums > Technical Section > Valvetrain - LGM Racing and Development

Valvetrain - LGM Racing and Development

Reply
 
Thread Tools Display Modes
Old 03-10-2012, 11:33 AM   #1
mhancock
**BOOSTED SBF***
Smoked another BBC
 
mhancock's Avatar
 
Join Date: Apr 2007
Location: Atlanta, Georgia
Posts: 3,464
Default 4.6 2valve cam suggestions

I have an 03 gt with 20k miles. We replaced the factory engine with a tekskid aluminum block, 302 stroked kit and truck heads with extensive port work. The aluminum intake is also ported. We added a 67mm Turbo with sct blow through mass air. We utilized what we thought were stock Mustang came and now we believe they too are the truck came since the valves are opening very late and the motor just isn't making the power we want on the dyno. This is a street car but we still want around 650hp. Would you suggest using stock came or custom grind? We want it very streetable. I had planned to keep the car for my personal collection but after sorting it out, I mayhem sell it to help fund my new grudge car but I want the 03 to be as nice as it can be before I even consider selling. It also has a lentech transmission and complete aeromotive fuel system. The rear is built, has adjustable upper and lower control arms and new nitto tires all around. Super nice black on black low mile car if anyone is interested after we get the cans figured out. It currently has 180lbs of cranking compression.
mhancock is offline   Reply With Quote
Sponsored Links
Advertisement
 
Old 03-10-2012, 11:39 AM   #2
mhancock
**BOOSTED SBF***
Smoked another BBC
 
mhancock's Avatar
 
Join Date: Apr 2007
Location: Atlanta, Georgia
Posts: 3,464
Default Re: 4.6 2valve cam suggestions

Sorry for the cam spelling errors. Stupid smart phone..lol
mhancock is offline   Reply With Quote
Old 03-10-2012, 12:26 PM   #3
bigd427w
Tool & Die Maker
Smoked another BBC
 
bigd427w's Avatar
 
Join Date: Dec 2008
Location: KY
Posts: 1,727
Default Re: 4.6 2valve cam suggestions

Bullet Racing Custom Grinds
__________________
Dealer For:


www.modernspeed.net
www.facebook.com/modernspeed

Fabrication provided by:
www.facebook.com/jessiesautogarage
bigd427w is online now   Reply With Quote
Old 03-11-2012, 01:08 PM   #4
Blown Smoke
Junior Member
Burnout box
 
Blown Smoke's Avatar
 
Join Date: May 2010
Posts: 16
Default Re: 4.6 2valve cam suggestions

Look at Nick from Modularheadshop.com ... he has worked with Bullet on all of his cams, and they work. He is full of knowledge!
Blown Smoke is offline   Reply With Quote
Old 03-11-2012, 01:57 PM   #5
bags50lx
Junior Member
Launchin
 
Join Date: Jul 2007
Location: greenville,sc
Posts: 256
Default Re: 4.6 2valve cam suggestions

What springs are on the car now?
bags50lx is offline   Reply With Quote
Old 03-12-2012, 07:00 PM   #6
NMRA P/S 5090
Senior Member
Smoked Another SBC
 
NMRA P/S 5090's Avatar
 
Join Date: Nov 2011
Location: small town, usa
Posts: 7,066
Default Re: 4.6 2valve cam suggestions

MHS.........FTW
__________________
Jared Bemish
OVALTECH PERFORMANCE
Many Many Thanks to: UPR PRODUCTS, BULLET CAMS, PAC SPRINGS, PROBE PISTONS, INGRAMS MACHINE SHOP, A&G AUTO PARTS, INTELLIFAB and THE CREW !!!!!
8.2 DECK MAFIA
NMRA P/S 0130 for 2014
NMRA P/S 5090 is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -4. The time now is 07:03 PM.


Powered by vBulletin® Version 3.8.6
Copyright ©2000 - 2014, Jelsoft Enterprises Ltd.
Garage Plus vBulletin Plugins by Drive Thru Online, Inc.
Resources saved on this page: MySQL 3.85%
vBulletin Optimisation provided by vB Optimise (Pro) - vBulletin Mods & Addons Copyright © 2014 DragonByte Technologies Ltd.
Yellow Bullet LLC