mini tubbed foxes - Page 2

deeohhcee · 11-04-2009, 11:11 PM

Quote:

Originally Posted by jat4

Almost looks like the 12" rim makes the tire wider. I am in the middle of this same project using wolfe mini tubs, and had the 9" shortened 2.5" on each side. when you find out the back space on the 12s for sure could you post that please.
Was leaning towards the billet specialties myself now I know they are for me.
Cars look fantastic, thanks for sharing and keeping me geared up on my project.

6BS

sickboystang · 11-05-2009, 08:01 AM

spoke with him last night, he said was sure they are 6"

vtwin · 11-05-2009, 05:10 PM

1

18 x 12 wheels with 71/2 bs

jat4 · 11-05-2009, 06:24 PM

Thanks. I think this could be the start of a real nice thread if people start posting pics of their mini tubbed fox bodies.

paxtonpwr · 11-05-2009, 08:45 PM

15X8 w/ 5.5 w/275's
15X10 w/6.5 w/325's

Minitub, coil overs, + narrowed rear by Tony's Metal Crafts

Roy Williams GT also done by Tony's Metal Crafts
15X12 w/ 28X13X15's

jevans · 11-06-2009, 07:43 AM

I'll throw a few pics into the pot...

9" narrowed 2" ea. side from stock width, notched frame rails,
Coilovers w/ Outlaw style Ladder Bars...

15x12's w/ 6" bs 29.5x10.5's

15x11's w/ 5.5" bs 315/60's

sickboystang · 11-06-2009, 07:56 AM

that is bad ass! whats the power plant?

jevans · 11-06-2009, 10:22 AM

Quote:

Originally Posted by sickboystang

that is bad ass! whats the power plant?

Thanks, I appreciate it...It's powered by a 400 c.i. Geardriven F-2 w/ Stage II Water Injection (for now)...Looking to make some upgrades over the winter...John

sickboystang · 11-06-2009, 11:42 AM

FoMoCo FTW!! awesome!

TwinTurbo2004 · 11-06-2009, 04:01 PM

Here's Mine. Team Z 9inch narrowed about two+ inches each side. Stock Suspension setup. Has 15x10 Alumastars with 6 inch BS double beadlocked. With 295's for now. 275's going on for next year .
All Motor 406 SBF Brodix Neal's/Glide. been 9.68 @ 140 on the brakes with the chute out trying not to break out.
Been 144.90mph blowing the tires off running a 2.0 60ft and 10.00. had to pedal it. Should be in the 9.20/30's at close to 148 on a good hit. Hopefully tomorrow.

Dan Smith

TEAM50SHOP · 11-06-2009, 05:53 PM

Work in progress. 315's 15x10 with 6.5 b.s

sickboystang · 11-06-2009, 09:16 PM

Quote:

Originally Posted by TEAM50SHOP

Work in progress. 315's 15x10 with 6.5 b.s

did you have to widen the fender to fit the 315?

paxtonpwr · 11-06-2009, 09:47 PM

Yes you will have to trim the fender on the 315 on all the ones i have seen, unless you have quite the narrow rear and deep backspace I guess..

Nick Edelmans in progress hatch w/ narrowed 9" moser m9/coil over- 315 MT radial on 15X12 wheel with some wheelwell reshaping by Rob "rookie" Meyers

TEAM50SHOP · 11-07-2009, 01:25 AM

Quote:

Originally Posted by sickboystang

did you have to widen the fender to fit the 315?

yes i am going to section the wheel well. its a little tight at the bottoms of the wheel well.

sickboystang · 11-07-2009, 07:59 AM

I wondered, thats a big ass tire!

11-05-2009, 08:01 AM	#17
sickboystang Member Pullin gears Join Date: May 2009 Location: Celina, OH "Lake of the Dead" Posts: 845	Re: mini tubbed foxes spoke with him last night, he said was sure they are 6" __________________ *thanks to:* Jeff Wightman at www.Precision-Autosports.com Nelson's Body Shop (419)394-3411 Celina Custom Auto (419)919-2277 Outlaw 8.5 Hopeful(ly)!

11-05-2009, 05:10 PM	#18
vtwin Junior Member Pre-Staged Join Date: Dec 2007 Posts: 63	Re: mini tubbed foxes 1 18 x 12 wheels with 71/2 bs

11-05-2009, 06:24 PM	#19
jat4 Junior Member Burnout box Join Date: Jan 2008 Posts: 29	Re: mini tubbed foxes Thanks. I think this could be the start of a real nice thread if people start posting pics of their mini tubbed fox bodies.

11-05-2009, 08:45 PM	#20
paxtonpwr Member Pullin gears Join Date: May 2005 Location: S.NJ Posts: 724	Re: mini tubbed foxes 15X8 w/ 5.5 w/275's 15X10 w/6.5 w/325's Minitub, coil overs, + narrowed rear by Tony's Metal Crafts Roy Williams GT also done by Tony's Metal Crafts 15X12 w/ 28X13X15's __________________ ALL OUT AUTOMOTIVE Support Your Local Speed Shop VORTECH~Tony's Metal Crafts~Harris Motorsports Dealer for vortech,trick flow,upr,summit,moser,keystone,mickey T. jegs,etc.. http://www.youtube.com/watch?v=QrZyMAUOCQQ please note any posts and opinions by me are solely mine and do not reflect or speak for anyone besides myself unless specifically noted

11-06-2009, 07:43 AM	#21
jevans Member Pullin gears Join Date: Oct 2006 Location: grove city, ohio Posts: 730	Re: mini tubbed foxes I'll throw a few pics into the pot... 9" narrowed 2" ea. side from stock width, notched frame rails, Coilovers w/ Outlaw style Ladder Bars... 15x12's w/ 6" bs 29.5x10.5's 15x11's w/ 5.5" bs 315/60's __________________ JET Race Cars... "It's Just Another Mustang"

11-06-2009, 07:56 AM	#22
sickboystang Member Pullin gears Join Date: May 2009 Location: Celina, OH "Lake of the Dead" Posts: 845	Re: mini tubbed foxes that is bad ass! whats the power plant? __________________ *thanks to:* Jeff Wightman at www.Precision-Autosports.com Nelson's Body Shop (419)394-3411 Celina Custom Auto (419)919-2277 Outlaw 8.5 Hopeful(ly)!

11-06-2009, 11:42 AM	#24
sickboystang Member Pullin gears Join Date: May 2009 Location: Celina, OH "Lake of the Dead" Posts: 845	Re: mini tubbed foxes FoMoCo FTW!! awesome! __________________ *thanks to:* Jeff Wightman at www.Precision-Autosports.com Nelson's Body Shop (419)394-3411 Celina Custom Auto (419)919-2277 Outlaw 8.5 Hopeful(ly)!

11-06-2009, 04:01 PM	#25
TwinTurbo2004 Junior Member Launchin Join Date: Feb 2007 Location: NJ Posts: 355	Re: mini tubbed foxes Here's Mine. Team Z 9inch narrowed about two+ inches each side. Stock Suspension setup. Has 15x10 Alumastars with 6 inch BS double beadlocked. With 295's for now. 275's going on for next year . All Motor 406 SBF Brodix Neal's/Glide. been 9.68 @ 140 on the brakes with the chute out trying not to break out. Been 144.90mph blowing the tires off running a 2.0 60ft and 10.00. had to pedal it. Should be in the 9.20/30's at close to 148 on a good hit. Hopefully tomorrow. Dan Smith

11-06-2009, 05:53 PM	#26
TEAM50SHOP Junior Member Launchin Join Date: Mar 2009 Location: Owego NY Posts: 267	Re: mini tubbed foxes Work in progress. 315's 15x10 with 6.5 b.s

11-06-2009, 09:47 PM	#28
paxtonpwr Member Pullin gears Join Date: May 2005 Location: S.NJ Posts: 724	Re: mini tubbed foxes Yes you will have to trim the fender on the 315 on all the ones i have seen, unless you have quite the narrow rear and deep backspace I guess.. Nick Edelmans in progress hatch w/ narrowed 9" moser m9/coil over- 315 MT radial on 15X12 wheel with some wheelwell reshaping by Rob "rookie" Meyers __________________ ALL OUT AUTOMOTIVE Support Your Local Speed Shop VORTECH~Tony's Metal Crafts~Harris Motorsports Dealer for vortech,trick flow,upr,summit,moser,keystone,mickey T. jegs,etc.. http://www.youtube.com/watch?v=QrZyMAUOCQQ please note any posts and opinions by me are solely mine and do not reflect or speak for anyone besides myself unless specifically noted

11-07-2009, 07:59 AM	#30
sickboystang Member Pullin gears Join Date: May 2009 Location: Celina, OH "Lake of the Dead" Posts: 845	Re: mini tubbed foxes I wondered, thats a big ass tire! __________________ *thanks to:* Jeff Wightman at www.Precision-Autosports.com Nelson's Body Shop (419)394-3411 Celina Custom Auto (419)919-2277 Outlaw 8.5 Hopeful(ly)!

Thread Tools
Show Printable Version Email this Page
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode