Yellow Bullet Forums banner

Reaction score
2

Marketplace Rating
(0.0 - 0 reviews)

Profile posts Latest activity Discussions Buy & Sell Reviews About

  • · Registered
    Joined
    ·
    1,159 Posts
    hello my name is ron i see on your past post that you run water meth do you regret not going with a inter cooler ......how is that kit from rodney working .....i need to pull the triger on a way to keep things safe on my build ,,,,,would like to talk to you if your free some time ...910-587-9228

    · Registered
    Joined
    ·
    1 Posts
    Ed, I have a great person locally to port your intake, send me your email or cell and I can send you pics of mine.
    rayshellracing@yahoo.com, your neighbor Ray

    · Registered
    Joined
    ·
    1 Posts
    i have a brand new wolfe anti roll bar forget if its single or double i live in hatboro off county line if your intrested let me know

    · Registered
    Joined
    ·
    160 Posts
    Been checking out your build of your car. How much did the rollcage cost you. I did my own 3 yrs. ago but doesn't look nowhere as good as yours. I would love to get someone that knows what there doing build mine.

    · Registered
    Joined
    ·
    160 Posts
    OK, i have a new problem. hooked the box up and got to the map sensor and NO CABLE!! is that something i have to buy extra, if so were do i get it?

    · Registered
    Joined
    ·
    160 Posts
    Nevermind I found it. it also says REVRUN2, or I can choose 4,6,or 8. not sure which to choose. so I start my graph out at 15psia, if i start pulling timing at 5# I would start it a 20psia, correct.

    · Registered
    Joined
    ·
    160 Posts
    i can't find the box to pick the map sensor. do i have to hook it up to the 6al2 in the car before I can do this. I haven't got the box in the car yet, just download the software and been playing around with it

    · Registered
    Joined
    ·
    160 Posts
    I downloaded the MSD disc and on the graph it only shows to 15psi, don't know what I'm missing. I'll play around with it some more tommorrow and see what I can come up with. I'm gonna drill another hole in my intake for the map.

    · Registered
    Joined
    ·
    160 Posts
    Could you send me a pic of your map sensor. How you have it and your vaccum lines run. I'm using a #4 braided hose for my BOV, so I'm gonna have to do something different, drill another hole in the intake or tee off of that one or something.

    · Registered
    Joined
    ·
    160 Posts
    Got it. I bought an adapter from Staples for the cable and tried to download the program to my computer and my Anti-virus went all to pieces. So I guess I'll find one like on MSD site the IOGear and try it. That just puts me behind that much further cause I'll have to wait till weekend to get it.

    · Registered
    Joined
    ·
    8,464 Posts
    yes you reference the vacuum lines from the BOV and map sensor from the same place. must see vacuum and boost

    · Registered
    Joined
    ·
    160 Posts
    So drill a hole in the intake below the carb. I have one on one side for the BOV reference point. Is that what you were talking about in your earlier post. I may have misunderstood it.

    · Registered
    Joined
    ·
    8,464 Posts
    map sensor should be in the intake manifold to see boost and vacuum. on msd site they have a link for the usb adapter ect. i got a new laptop that has a serial port so i dont use mine anymore but dont know if i have the disk that came with it for the drivers. bottom of this page

    http://www.msdignition.com/softdwn.htm

    · Registered
    Joined
    ·
    160 Posts
    I finally got my 6AL2 today. Opened it up to look at everything and I already see a problem. The cable they send to download from computer to the box will not work with any of my 3 laptops!!!! Did you have this problem? Is there some kind of adapter to change it to USB or am I screwed. You posted before to place my map sensor close to my BOV. My BOV is closer to my turbo and was wondering if placing the map closer to the carb would be alright. I'm running A/W with piping through the car to the back seat. Thanks

    Tim

    · Registered
    Joined
    ·
    160 Posts
    was wondering if your 6al2 came with a pigtail for you map sensor, if not where did you find one?

    Thanks,
    Tim

    · Registered
    Joined
    ·
    160 Posts
    Thanks, I'm sure I've got your name somewhere. I messaged you about you water pump before I think.
    Thanks

    · Registered
    Joined
    ·
    8,464 Posts
    msd had MAP sensors i believe they have the part# for them. i went with a 3 bar. 15psi is ambient plust anothere 30lbs so 22 will work with that. all you do is reference the MAP sensor where your BOV goes so it sees vac/boost.

    yes you can call me. i work some crazy hours sometimes so if i dont answer leave a message ect. 215-880-8138

    · Registered
    Joined
    ·
    160 Posts
    30# is plenty, were do you get a map sensor and were does it go on the turbo stuff? Cold side? I plan on running around 22# so do I need a 3 bar map? I get this thing going, would it be alright if I give you a call if I need help through this thing?

    Thanks again,
    Tim

    · Registered
    Joined
    ·
    160 Posts
    I have a couple questions about your 6530 box if you don't mind answering. First, is it a stand alone box? Second, can you map it out on your PC to tell it when to start pulling timing for boost?(example, start pulling timing at 8psi, and 1 deg. for every # of boost after that 8#. Is there a max of degrees it can pull out? I'm thinking about putting one in my car before I take it back to the dyno and would greatly appreciate some info before I go.
    Thanks
    Tim Pease
  • Loading…
  • Loading…
  • Loading…
  • Loading…
  • Loading…
Top