Tall Deck Block

[yellowmalibupa]

Kinda looking for a Tall deck BowTie block, Something to build a 588
I have crank an rods So If someone knows of one please PM me

thanks Steve

[david gray]

i have a 10.2 deck merlin block. from pat musi. im going to a aluminum block so i don't need it. it has about 20 passes on it. make me a offer...

[yellowmalibupa]

What was the bore of it ? An for an offer I'm not sure what they are worth used!! I'm realy at a loss!!!!!!

[david gray]

4.5 bore

[yellowmalibupa]

Your going to have to let me know what kinda $ your going to want for it. I have a guy here that has a virgin bow tie block gen 4 he wants 1800.oo for it Don't know if thats a good deal or not! The more I have read the merlins an darts are ALOT stronger But cost alot more
So it was a 572 then???

[david gray]

check your PM's:)

[speedfreak2030]

still have the block?

[sschevy540]

what are you looking to get out of the block.

[sschevy540]

IS THE BLOCK STILL FOR SELL ?

[JOE68]

do you need a sheet metal intake for that? i have one that i am pulling off my motor to do a turbo motor with a cast intake?

[yellowmalibupa]

Is It For 1 or 2 carbs???

[onefast68]

i have a tall deck dart big m block with billet caps.needs a weld repair on both sides at the bottom where a rod let go..did not crack the water or oil galleys.may need a sleeve because it chipped the bottom of the cylinder.4.6 bore and clearenced for a 4.75 crank.

800 plus shipping.

[JOE68]

it is for two carbs... i have two dominators along with it... the ones in the pictures are not the ones that come with it..... i have newer and cleaner looking carbs for it. also have linkage


http://img145.imageshack.us/img145/527/christmas2006007jh8.th.jpg (http://img145.imageshack.us/my.php?image=christmas2006007jh8.jpg)

[yellowmalibupa]

More than I'm looking for at this time, Are you selling just the intake or as a complete package? A friend of mine is looking for a set of carbs what size are they? An would you sell just the carbs? If so how much would you want for them?

[JOE68]

yeah i could maybe do that. they are 1050's only been ran a couple of times

[yellowmalibupa]

yeah i could maybe do that. they are 1050's only been ran a couple of times
YOU NEVER SAID HOW MUCH FOR THE CARBS!!!!

[JOE68]

950

[yellowmalibupa]

Thats for both carbs? An what size are they? An how old are they, Part #'s Thanks

[JOE68]

i will have to wait until i get home for the part numbers. but they are 1050's with the newer style body. they have sat on a self for the last year or so. But, used a year before that. you can call anytime at 810 397 5925