WTB Oil Pan for SB DART IRON EAGLE / ROCKET

[dmc_racing]

I'm looking to buy a Oil Pan for a SBC Dart Iron Eagle Block (Spread Pan Rails). I would perfer Aluminum, but steel would be OK. Needs to be NO DEEPER THAN 4 1/2" in the front area.

Also looking for a 4340 Eagle or Scat Crank with 3.75 or 3.875 stroke with 350 mains & 2 pc seal.

Just let me know what you have. THANKS !

[dmc_racing]

Anyone with a pan :confused:

[Greg2]

Any pan made to fit a Rocket block should work.

[Manic Machinist]

Not sure how deep that pan I have is in front. I'll check it when I get home.

[Dave Bowman]

I have a dry sump pan.. is this what you are looking for?

[Manic Machinist]

The pan is 5-1/8" deep in front for a 4" width and tapers off to 3-1/4" deep at the driver side which is even with the pan rail, and the pass. side tapers down to 2-7/8" deep and is within a 1/4" of being flush with the fuel pump boss.

[Disoriented Express]

Are you still looking for a pan ?