Need 2.180-2.200 titanium IN Valves

[Mustangburnout75]

Does anyone have a good set of 7mm, 2.180-2.200 intake valves in good condition? Need them for a set of Yates heads

[ProGSX]

I think I have a set. Do you know the oal?

[Mustangburnout75]

They need to be at least 5.500, if they are longer that is fine, i can cut them to size and machine a new keeper groove and run lash caps.

[ProGSX]

UHG. I have 2.17s sorry.

[Mustangburnout75]

Hey Jeff 2.170's will work. Actually i measured my valve to valve clearance 2.180 is the biggest i can go and even then i would have to cut .010 off each side to get a safe clearance. If you could send me pics of them if you have some.

jack@mosleymotorsports.com
713-373-6558


Thanks,
Jack

[ProGSX]

Jack,
I have some bad news. One of the valve is the box measures 2.15. Someone switched it on me... I have 7 2.17 valves if your interested, sorry.

[Mustangburnout75]

Hey Jeff,

The school that i go to has some 2.190 valves the the cratered in one cylinder so i may be able to cut one down to 2.170. So i will let you know if this will be possible to do. Thase valves have had an almost full season on them so..........

Thanks and i will keep in touch on it.

Jack