598 All Aluminum BBC Setup for Twin Turbos

[Brian Brown]

598 bbc, Century Aluminum block, 18* big chiefs, custom comp cams, Moroso Dry Sump (one vane needs to be replaced, but we run it without using it), Msd Distributor, Setup for dual 160lb injectors, but we only used 1 set, so only comes with one set, sheet metal knuckle, throttle body, Procharger blow off valve, sheet metal valve covers, belt drive, mild steel headers with jet hot coating, etc etc. Engine went 4.56 at 169mph in an outlaw 10.5 car at 3200lbs with only a 1.20 60ft. Engine will run 4.40s in outlaw 10.5 trim, enough power to go .30s by turning it up. Engine has plenty left in it. This was a Gene Fulton NOS motor that was converted to a turbo motor by Hunstville Engine in Alabama. Engine would be well over $40k to duplicate. Buy it today for $25,000. Wrecked the car, so the motor needs to be sold. Engine was tuned by Steve Petty on the chassis dyno and at the track. Car went over 206mph with this engine in the 1/4 mile shutting it off at 1200ft.

Will make package deal with turbos, intercooler, etc.

Call Brian at 601-218-3848.

Thanks,
Brian
brian@quicktimemotorsports.net

[fasttofun]

I have a 565 bbc. what do you want for the turbos. some info on the turbos would help thanks and the intercoolerr