Ron Miller
10-01-2007, 12:17 PM
1969 4 bolt block with a 618 casting number. I think its a Corvette block if it matters. Its bores are 4.061, bored/honed with a torque plate for moly ring, burned blasted, cam bearings installed, needs freeze plugs. Block has been decked,clean up cut just to square it up. The 3 large top cooling holes are plugged (needs small cooling holes drilled in it, 3 small oil holes in front tapped for NPT plug, block has been deburred. Lifter bores touched hone. The boss where the dip stick is located is ground off to clear my (Ed Quay) large tube headers. I never used the block after it was machined. Sell for $ 750.00.
Ron Miller
Brownstown, Mi
734-782-9333 call after 9:00 am up to 2:00 pm, Thanks
P.S. would make a great block to build a 388 up to a 396
Ron Miller
Brownstown, Mi
734-782-9333 call after 9:00 am up to 2:00 pm, Thanks
P.S. would make a great block to build a 388 up to a 396