Sam Vincent's Top End 4-Sale

[Sam Vincent]

TEA/Brodix Neal 201 heads, flow 440cfm Int. & 325cfm Exh. @ 1.00"lift wit hgood mid-lift, 320cc runner, 45cc chamber, all titanium valves, retainers ,locks, new valves, seats & guides last winter.
New PSI DR1250 springs (425lbs@2.250") at Joliet. SC1 intake bolt pattern also machined into heads. No Junk. $6000

Vincent/Jesel Mohawk rockers, My rocker system is custom vs. the normal Neal/Jesel set-up with better Geometry to work with the 2.250" installed height of the above heads, have spare rockers & parts, w/ custom stands. $1500
Rockers go with heads, will not serarate.

Wilson/Edelbrock Victor glidden intake (SC1 bolt pattern), fully ported to work with above heads and fits on 9.5" block(no spacers required) with two NX fogger systems and carb spacer and nitrous plate with regulators $3200

Everything for goes for $10K

270-977-1893

vinformance@comcast.net

[Sam Vincent]

Bump.

[INTHE7'S]

what ratio is the rockers?

[Sam Vincent]

what ratio is the rockers?

Sorry, won't tell til I get $$$$$

[INTHE7'S]

kind of hard to buy what you dont know if it will work with your combo. I already bought heads from you so maybe pm me since we are going to order mine(rockers) in 2 weeks or you can sit on them sam. I not trying to be a dick or steal your secrets but im not giving you $$$ if it wont work.

[Sam Vincent]

kind of hard to buy what you dont know if it will work with your combo. I already bought heads from you so maybe pm me since we are going to order mine(rockers) in 2 weeks or you can sit on them sam. I not trying to be a dick or steal your secrets but im not giving you $$$ if it wont work.

Sorry, but I won't separate the heads/rockers.

[blown54]

Sam change the wording of your ad,it looks like you are selling everything seperate the way you got it so there is no confussion.
Thanks