pump for oil return ??

[OUTLAW GTO]

My turbo's are mounted low in the front , and want to put a pump inline to help suck the oil out. what would be a good pump to use?? the smaller in size the better for me.. Thanks for help!!

[Fantasy]

Try MR Turbo www.mrturbo.com . They use alot of thoughs scavenge pumps in there bike kits.

[johan]

I was talking with a turbo racer at RWSF - Orlando last year. He was using a Weldon fuel pump for his twins. They was mounted low in the front, same as yours. I forgot to take a picture of the instalation....

[466Turbo]

http://www.marine-electronics-unlimited.com/Reverso+GP%2D301+Oil+Gear+Pump.html

Good pump, Good price.

Tell them Sean S. told you about them.

Thanks

[Brian Brown]

This is what we use. Cheap, plenty of volume, and zero problems. You'll have to change the ends on the wires, but for the price it's worth it.

http://cgi.ebay.com/12V-Water-Waste-WVO-Transfer-Oil-Utility-Pump-12-v_W0QQitemZ270167973036QQihZ017QQcategoryZ46547QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem

[ProGSX]

A friend of mine uses a Holley blue pump.

[OutlawFish]

If you're using an external oil pump just add another scavange for the turbos, that's what I did with my Peterson pump.

Mike Gray

[466Turbo]

This is what we use. Cheap, plenty of volume, and zero problems. You'll have to change the ends on the wires, but for the price it's worth it.

http://cgi.ebay.com/12V-Water-Waste-WVO-Transfer-Oil-Utility-Pump-12-v_W0QQitemZ270167973036QQihZ017QQcategoryZ46547QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem

Who is the manufacturer of this pump?

Thanks
Sean

[Louie L]

Who is the manufacturer of this pump?

Thanks
Sean
That looks just like the pumps sold by Harbor Freight. Even the label looks similar. The HF pump looks to be a knock off the ones sold by Grainger. I have one of the Grainger ones for my liquid intercooler.

[Theothersideofthestory]

you guys figure a pump is a good " just in case" for a turbo mounted up top ?

Is there too much pump you can have for sucking the oil out ? Possible side effects ?

[1GB]

you guys figure a pump is a good " just in case" for a turbo mounted up top ?

Just in case what? As long as the drain is facing downward during both the launch and your pass down the track, I think of any event that would warrent adding a pump "just in case".

With that said, I can't see any negative side effects other than additional weight for a part that's not necessary. :rolleyes:

[UglyStang]

This is what we use. Cheap, plenty of volume, and zero problems. You'll have to change the ends on the wires, but for the price it's worth it.

http://cgi.ebay.com/12V-Water-Waste-WVO-Transfer-Oil-Utility-Pump-12-v_W0QQitemZ270167973036QQihZ017QQcategoryZ46547QQs sPageNameZWDVWQQrdZ1QQcmdZViewItem


you guys are running foamy oil through those? (curious) ;)

[n8secstangg]

i have a used westech for sale if interested

chad
813-784-8248

[Nmbr1GMfan]

Here is an informative article. http://www.rbracing-rsr.com/oilsystems.htm

[TurboTen5]

i use the tilton oil pump you can get it from summit

[CarterRace]

http://www.carterrace.com/web/creoilpump.jpg


This is the pump we run in several rear mount cars, works great even during extended street use (3-5hours of driving)...pm me if you need some help getting one.


• 350F Fluid Temperature
• 3 GPM Pump Rate, 60+PSI
• Hardened Bronze Gear Pump Rotors
• 10,000 Hour Rated Dual Ball Bearings
• 10,000 Hour Rated Over-sized Brushes
• Black Anodized Extruded Aluminum Heatsink
• Nickel-plated Pump Head
• Stainless Steel Pump Head Fasteners
• 3/8" NPT F Threaded Pump Head Ports
• -6AN M Nickel-plated Adapters
• Hi-Temp Wiring
• Weatherproof Connectors
• Rubber-isolated Mounting Bracket
• Low-vibration, Quiet
• 6.2" x 4.1" x 4.1" size, 6 lbs
• 12 Volts Nominal
• 5 Amp Nominal
• Two-year Warranty

[CarterRace]

http://www.carterrace.com/web/creoilpump.jpg

• 350F Fluid Temperature
• 3 GPM Pump Rate, 60+PSI
• Hardened Bronze Gear Pump Rotors
• 10,000 Hour Rated Dual Ball Bearings
• 10,000 Hour Rated Over-sized Brushes
• Black Anodized Extruded Aluminum Heatsink
• Nickel-plated Pump Head
• Stainless Steel Pump Head Fasteners
• 3/8" NPT F Threaded Pump Head Ports
• -6AN M Nickel-plated Adapters
• Hi-Temp Wiring
• Weatherproof Connectors
• Rubber-isolated Mounting Bracket
• Low-vibration, Quiet
• 6.2" x 4.1" x 4.1" size, 6 lbs
• 12 Volts Nominal
• 5 Amp Nominal
• Two-year Warranty


PM me if you need any help fiding this pump.