18* heads?

[n2novas]

what is the recommened brand of choice,going 406 with a fogger.looking for heads and intake suggestions.got a short block sitting.thanx:rolleyes:

[Greg2]

Dart makes a very good 18° SBC head.

[Scott McMullen]

15* BMF Hands Down worth the Cash N2Novas! And Let Chris Get them For you

[MCEcomp]

I would talk to Curtis from Race Flow Developement. He has some awesome 18deg stuff!!

[n2novas]

15* BMF Hands Down worth the Cash N2Novas! And Let Chris Get them For you
of course these are not for me..;)

[Suicidal Racing]

best out the box are rfd's or bmf's

[BJCRAZYZ]

I would talk to Curtis from Race Flow Developement. He has some awesome 18deg stuff!!
x2

[Maximum Race Engines]

The BMF head will work very well out of the box, as will the 18's that Curtis does. I have spoken in depth with Curtis about his stuff, getting them big enough to feed the bigger inch small blocks with his CNC deal. Either head will work great for the 406 on spray for an out of the box deal. I feel Curtis may have a little better advantage with his design, and the price doesn't hurt either. I tend get bare castings and port/build each one to the combination. The 406 doesn't need a real big MCSA to feed it, and at 268cc runners, you should be fine.

[Rockin' Al]

I don't know which casting is best, but my GM 18 degree castings that were welded, rolled, and ported by CFE to 13 degrees work well.

I ran 8.19 at 170.2 mph naturally aspirated with a 440 sbc on 10.5W tires.

Good luck

[JeffMcKC]

I would look at RFD's Monster head http://www.raceflowdevelopment.com

Curtis should sell the service and time he will spend with you, he baby sits me enough on mine LOL

[cboggs]

Jeff, .. can you call me with your CC number, .. I need to bill
you for phone support, .. ;-)

[JeffMcKC]

Will you take a check?

[Disoriented Express]

I've got a set of 18* Darts very fresh ( dyno time only) that we went 8.40 @ 168 with a small tune up with a 377 cu in sbc in a 3185# camaro that I mite want to sell.

P.M. me if you have any interest. thanks Bob

[Scott McMullen]

I've got a set of 18* Darts very fresh ( dyno time only) that we went 8.40 @ 168 with a small tune up with a 377 cu in sbc in a 3185# camaro that I mite want to sell.

P.M. me if you have any interest. thanks BobA Yellow One?:p

[cboggs]

Will you take a check?
nope, .. :rolleyes:

[rambler68]

do you still have the 18* heads for sale.. thanks