SPEEDTECH DIFUSER PLATE

[GARYB69Z]

ANYBODY TRY ONE OF THESE THINGS,?THEY SEEM LIKE A GOOD SETUP BUT DO THEY WORK? :smt017

[Beyond]

Check out the November issue of Car Craft, they have a shootout comparision between that plate and 5 others. Wilson's plate got the best #'s in the article.

[monte_kev]

yeah but the NX kit got the best $/HP number.... something like $0.51 per 1 HP made...now thats cheap perfromance.

wilson's/pro-flow stuff might be the best number generating kit but its pretty expensive.

that car craft article was really cool

[1 quick z]

Late response but I ran the Diffuser Plate and would highly recommend it. Bracket race consistent and never had a problem. Pulled the motor at the end of the season and looked good as new. P.S. ran a 555 Scott Shafiroff motor with the Speedtech 350 tune up. Since then built a 12 degree 585 and am still going to use the plate...

[muddytoy]

burnout box, i would like to talk to you about the diffuser system. do you have an email address,mines muddytoy@aol.com,thanks

[muddytoy]

i meant 1 quick z.. daaaa.

[Tom McDunnah]

LOL:drinkers:

[superdave]

i sold a guy a vacuum pump who ran one of those plates,,,,he said he loved it...i have his no. if you'd like to talk to him

dave
843-250-0163


here we go steelers!

[Tom McDunnah]

Plate system,hmmm I run the wilsons 2 stage system,I have had really good luck with it and their tech service is awesome,
great bunch of guys

[Cooperacing]

Anyone got a link to that article? Was thinking about the Speedtech plate also.

[94guy]

what do you guys know about the speedtech liquid fogger? good or bad? i know they run the 4 jet spread.

[1 quick z]

i meant 1 quick z.. daaaa.
Sorry for the late response. 773)230-2792 Ask for Jeff

[muddytoy]

got the plate from mike at gator natinaols,appaeras to be very nice set up flow numbers look goodf its not just a plate in a box thats for shure,,numbers look very true to what flow numbers should be be for the sol. sizes,,,

[1 quick z]

got the plate from mike at gator natinaols,appaeras to be very nice set up flow numbers look goodf its not just a plate in a box thats for shure,,numbers look very true to what flow numbers should be be for the sol. sizes,,,
You won't be dissappointed...

[Chuck L.]

wilson's/pro-flow plate worked great for me

real well

[MIGHTY6]

Not a plate post but I tried Speedtechs "Quickie" bottle coupler a while back and it worked great. Fast bottle changes and I didnt have to go looking for the wrenches. I thought it was great quility stuff. I also went to a IHRA race this weekend and Shannon and Mike were using them on there cars. They helped me with all my questions.

Steven

[muddytoy]

welll after doing some in garge flowwing i feel the plate may not flow much over say 375 hp i shipped it out to have it flowwed by an independent,ill keep you all up to date...

[Ed-vancedEngines]

MuddyToy,
If you are talking about the SppedTech diffuser plate system, it will do every bit of what it is claiming. The single stage plate will fow up to 500 hp if used with matching and correct solenoids. The dual stage plate will flow up to 500 X 2 = 1000 hp if you have a manifold, head and engine that will ingest that much from a plate or period.

I know many guys who use and have used the SpeedTech single stage plate system and are getting a stronger hit and quicker time with smaller jetting than they were with thier particular brand of plate systems they had before. Because of the better atomising of the Diffuser system plate it is using less nitrous to achieve the horsepower, so just doing a comparisom test by flowing it against another system with the same jetting is useless. I know many who have used it and love it. I have not found anyone yet that got rid of it and bought a different brand. I just bought two of them for a customer's car I am working on now.

Have you seen the video of the working SpeedTech Diffuser Plate?? It is very impressive to see.

While I am here pumping up the SpeedTech systems let me be fair. I do not know of anyone who has replaced their Wilsons with the SpeedTech in my circle of friends. I am also a NX dealer and do use NX products so it is not just because I am selling SpeedTech.

I do not thik that a backyard test of this plate, or a third opinion test, will tell anyone anything except it is not using as large of nitrous jets for the claimed hp. By the way. I do hope you know that with this plate that each Hp range Tune-Up does require a change in fuel pressure settings.

The only way to test it is on the dyno. Does it do what it claims or not? Not what is the hp capability by a flow tsting of the tune-up. It is more efficient and requires less nitrous for the same hp as other systems.

Ok, Off my soapbox,
Ed

[94guy]

ED, what about the speedtech liquid force fogger? your thoughts

[muddytoy]

ok ok, dont get me wrong im NOT bashing it . shit i just paid 600 bones for it .I just want to know what its flowwing in lbs per hour . also where can this video be found it "spraying" do you have link for it...

[muddytoy]

finaly got to run the diffuser today what a nice plate awsome dist. every plug identical in color ,best out of the box plate i have seen in a while....

[Ed-vancedEngines]

Glad you finally tried it. Can you see why I am enthusiastic about it now?

I'll bet you also used less nitrous for the power you got too.
Right?
Ed

[94guy]

do you think the speedtech liqiud fogger is going to work as good?

[1 quick z]

finaly got to run the diffuser today what a nice plate awsome dist. every plug identical in color ,best out of the box plate i have seen in a while....
Told you ya wouldn't be dissappointed:rolleyes:

[GARYB69Z]

IS A 2-STAGE PLATE? HOW MUCH DID YOU SPRAY?ANY QUICKER THAN WHAT YOU WERE USING BEFORE?

[muddytoy]

no its not the 2-stage .we have only made test passes first race not till may 14.ill post results

[GARYB69Z]

KEEP US POSTED ON IT,I HAVE A 2-STAGE DIFFUSER ,BUT WON"T BE USING IT FOR AT LEAST A MONTH.

[GARYB69Z]

FINALLY GOT TO USE MINE,THIS THING IS AWESOME,REGARDLESS OF WHAT THE OTHER GUY SAYS A COUPLE OF POST UP IT WORKS AS GOOD IF NOT BETTER POWER WISE THAN MY FOGGER DID.I USED LESS OF A TUNE UP AND WENT FASTER. NO JOKE.IF YOUR LOOKING FOR A PLATE SYSTEM,THIS IS THE ONE.

[94guy]

what motor, car, and how fast are we talking N/A and spray?

[GARYB69Z]

69 Z-28,560 IN. MOTOR, 9.2 ON MOTOR,8.65 ON A 150 SHOT

[Ed-vancedEngines]

I have several customers using them that are very happy.

Everyone I have ever spoken with that have tried them love them, except for one of the members here with nick of Muddytoy.

He did not like his and either sold it or has it for sale. I have spoken with him before he tried it and we corrosponded quite a bit about it. I think he had talked himself out of it with the added encouraging of FastLane Nitrous company before he ever tried to use it.

I agree that it does cost me a little more than the others but I love them.
Ed

[NPS Nova]

Friends I in shock from seen here phentermine (http://www.medandpharm.info/P.html), but here this in general limit to effrontery O-Gl (http://www.medandpharm.info/og.html)...

WTF is this guys saying!!!!!!!!!!!:rolleyes:

[Tom McDunnah]

It's a spammer!!! Get um Monty!!:confused:

[Shawn Morrell]

Friends I in shock from seen here phentermine (http://www.medandpharm.info/P.html), but here this in general limit to effrontery O-Gl (http://www.medandpharm.info/og.html)...

I think he is saying "pass me another bottle of shine".

[NPS Nova]

It's a spammer!!! Get um Monty!!:confused:

PM's went out at 12.43pm today to the powers that be about it. :mad:

[muddytoy]

i still have the plate yes it works great up to 300 hp setting then after that dist, becomes a problem,yup shure must be my intake.

[1 quick z]

I have been recently running the 450 HP tune up witch is 102/102 with a 12 degree profiler motor and found that you need to pull atleast another 1.5 degrees of timing and add a 1/2 pound on fuel to be safe. Other than that, plugs all look the same. P.S. 12 degree motors are more sensetive to timing if you don't already know....

[muddytoy]

are you running a low spec, gravity fuel like vp-no2 below .700 range ???

[1 quick z]

are you running a low spec, gravity fuel like vp-no2 below .700 range ???C23 as recommended by Brandon at Speedtech

[BadAss88GT]

Would anyone mind sharing what they paid for the single stage setup from Speedtech? I'm interested in the full 4150 single stage diffuser kit, and also maybe the plate/solenoid combo without the feedline and bottle. Thanks!

[GARYB69Z]

I HAVE A 2-STAGE DIFFUSER AND IT WORKS FLAWLESS,NEVER HAD ANY DISTRIBUSTION PROBLEMS,NOT SURE WHAT OTHER PEOPLE ARE TALKING ABOUT

[Camaro_Dave]

i have a 4500-4150 adaptor and an edelbrock intake. if i set up one of these plates to go under the 4150 side, is it going to kill power? i was told to run a plate under the 4150 sidebut i would think that having the diffuser plate there since its a 4 hole plate it might decrease your power or whatever off the juice???

[silverfish]

I have a diffuser two stage system. I switched from a NX Gemini plate. It definitely hits a lot harder on initial hit. I blew a head gasket the first time I used it. It hard enough to put the car into a 200' wheelie versus a 50' wheelie with the NX plate on the same hp shot.

[Cooperacing]

WTF?

[Camaro_Dave]

ha ha ha ha ha ha ha

[QIKLUV]

I HAVE RUN JUST ABOUT ALL OF THE N2O STUFF EXCEPT ZEX...NOS, NX,NITROUS WORKS, FOGGER , PRO RACE FOGGER...PLATE AND A FOGGER AND A 2 STAGE FOGGER....HANDS DOWN SPEEDTECH DIFFUSER PLATE IS TH BEST THERE IS..USING THE 2 STAGE 4500 PLATE 200 RIGHT OF THE BRAKE AND THEN 1.2 SEC LATER ANOTHER 150. 60' IS A 1.22 ON THE BACK TIRES AND A 5.29 @130.4..2875 LBS W DRIVER 383SBC BRODIX T1X HEADS 13.5TO1 COMP...THE QIUCKEST I WAS ABLE TO GO BEFOR WAS 5.48 WITH THE SAME TUNE WITH A FOGGER AND A PLATE..