Small block question

[storeyracing]

Quick question how much power will a stock 010 4 bolt bolt small block hold up to? With the stock caps and how much power will a stock a 2 bolt hold up to? Its going to have a nos fogger on it also.Thanks Mike

[9secvega]

i'd like to know too, i've heard about 750

[KillerMonza]

That's a very vague question, need a lot more details such as how much n2o, compression, rpm, reciprocating weight, block prep including filled or not, good main studs or O.E. overbore or more importantly cyl wall thickness, and then there is the problem of factory blocks not being the same quality fron one to the other.

[storeyracing]

Say around 13.1 comp and 225hp of nos and head studs,4.030 bore not filled 7800rpm motor. With lite weight crank H beam rods JE 8CC Dome Pistons

[Suicidal Racing]

i had a 2 bolt 327 with just pistons and rod bolts in it and shifted at 7200 and ran a 150 shot with 13-1 comp and it made around 750hp

the 4 bolts i've seen go into 800 before with good light weight parts with 150 shot