t 400 shifting with procharger

[skyhawk jr]

i am installing a procharger with a turbo 400 and i want the car to shift with a regular valve body. not a manual valve body. is this possible for around town driving since the engine vacuum will be really low or not existant with the procharger. wondering if they make a kit or conversion like a 200 or 700 would be with the cable off of the throttle linkage.
any help is much appreciated.

[Ridings Automatics]

http://www.400raptor.com/

Look down about 1/4 page and you'll see a modulator that uses a 700 tv cable as opposed to vacuum.

[Hutch]

The other way has been to use a vacuum check valve in the modulator line and use an adjustable bleed between the check valve and the mod valve.
There was a cable system available , I may have some part numbers, i'll check at the shop tomorrow.

Hutch

[skyhawk jr]

thanks for all the help so far i am going to try the cable system first. thanks again