zoomies?

[gilsbachracecraft]

Got a procharged outlaw 10.5 car here and thought we would do something a little different with the exhaust.Every time I see a blown car at streetcar events they have the zoomies replaced by a collector muffler.I always liked the look of a zoomie but mufflers are required.I haven't seen anybody do something like this tell us if you have.They are not done but they should look killer frenched in to the fender and rocker.
http://www2.propichosting.com/Images/450019427/11.jpg
http://www2.propichosting.com/Images/450019427/10.jpg

[Jim Monson]

Look like mufflers to me. Those should look cool when they're done.

[junior]

looks killer bill :smt103

[Bigtime]

sweet!

[niceguy]

Absolutely killer!!!

[Twig_&_Berries]

Looks like they turned out sweet Billy! The roving makes 'em look excatly like a muffler. That stuff has an organic binder that is good to about 850C so it should'ent burn out or anything either. Its used as the insulator for conveter cones. Can't wait to see them on the car!

[gilsbachracecraft]

Looks like they turned out sweet Billy! The roving makes 'em look excatly like a muffler. That stuff has an organic binder that is good to about 850C so it should'ent burn out or anything either. Its used as the insulator for conveter cones. Can't wait to see them on the car!That shit itches beyond belief when you are workin' with it.I hope it wasn't gonna burn out of there,I just got done welding them together.Thanks for the lessons the other day,I think I have an idea to run acrossed your mind for collectors on Daves car -very simple but like you said a combination of both types of collector.I will have to make a few dies to do it but I have been havin' fun stamping stuff and making dies.

[Twig_&_Berries]

Yea - I should have told you to wear some gloves! If you get slivers of that stuff and they are like impossible to get out!

No problem on the collector; I'll have to bring the laptop up & we can get the concept down and go from there. We could have a shot at tuning the headers (length & diameter) if ya want to..........would take a while but we can give it a shot. I would need some pretty in depth details of Dave's engine though!

[gilsbachracecraft]

Yea - I should have told you to wear some gloves! If you get slivers of that stuff and they are like impossible to get out!

No problem on the collector; I'll have to bring the laptop up & we can get the concept down and go from there. We could have a shot at tuning the headers (length & diameter) if ya want to..........would take a while but we can give it a shot. I would need some pretty in depth details of Dave's engine though!We don't have to get in depth.

[Ed-vancedEngines]

I like those.

Ed

[gilsbachracecraft]

http://www2.propichosting.com/Images/450019427/16.JPG
http://www2.propichosting.com/Images/450019427/17.JPG

[popimp]

todd tutterow also did this on his blown smallblock mustang.maybe you can get some info from him on what he did to make them work.

[beebemotorsports]

http://www2.propichosting.com/Images/450019427/16.JPG
http://www2.propichosting.com/Images/450019427/17.JPG

I was up at your shop yesterday and talked to your dad
and he showed me the zoomis

All I can say is You Are The Man Bill !!!!

They look Auwsum

[Long Dong Silver]

:supz:Very nice!

[gilsbachracecraft]

todd tutterow also did this on his blown smallblock mustang.maybe you can get some info from him on what he did to make them work.Last time I saw Todds car it looked like this.

[popimp]

the zoomies he had on it before were individual mufflers.the bigdog rules changed because they thought it was an advantage for him to have the zoomies,even though it wasn't.just another tutterow rule change to try an slow him down.

[Jake]

Looks baddass Billy!

[i_miss_racing!]

I was out there last night and saw them on the car. fuckin' awesome. It was my first time at the shop and I wasn't sure if it was an art gallery or a race car/chassis shop. Billy is amazing. Not to mention a really cool guy. Great work guys.

[racrohn]

those are kick ass looking bill!:prayer:

I'll be up soon, I'v been getting settled into new house and working on new car. talk to ya later, fella

[Bill Adamski]

stoped by the shop they are KILLER

[howdy]

Bill and his dad treat every car like there own.They take huge pride in there work and they should.