Anti role bar with four link?

[cubicgator]

I am finishing up my first 4 link backhalve car and was wondering if a antirock bar is necessary. it is a backhalved 2000 mustang with morrison upgraded big tube 4 link, 9 inch, turbo BBF. mostly big tire 33/16 but wil try some 10.5w also. will it aid in tuning and launch, or will preloading link control rock? thanks for any input.
walter grosse

[gilsbachracecraft]

with a four link it is a must.

[Eric Williams]

what about a ladder bar setup? Also, what's the proper degree/or pinion angle for a ladder bar setup? Thanks.

[gilsbachracecraft]

anti-roll bar is not needed on a well built ladder bar rear suspension.Remember pinion angle has nothing to do with bite.2 degrees will be fine

[Eric Williams]

Thanks.

[DHR racecars]

I am finishing up my first 4 link backhalve car and was wondering if a antirock bar is necessary. it is a backhalved 2000 mustang with morrison upgraded big tube 4 link, 9 inch, turbo BBF. mostly big tire 33/16 but wil try some 10.5w also. will it aid in tuning and launch, or will preloading link control rock? thanks for any input.
walter grosse


Waddup Wally???

You gonna run that thing at portland????

Darren

[cubicgator]

Hell ya, trying to get it ready for the skating ring we call PIR. waiting on short block, drive line a some small stuff hopefully late spring.

[DHR racecars]

Hell ya, trying to get it ready for the skating ring we call PIR. waiting on short block, drive line a some small stuff hopefully late spring.


Kewl!!!

I should be up and running by late march..... :)

[DHR racecars]

Kewl!!!

I should be up and running by late march..... :)


2012 that is..... :(