Electrical schematic for Digi-set delay timer on 2 stages

[Monty Mikho]

http://yellowbullet.com/digi_set_2_stage.jpg

[Vanilla]

Where would the transbrake wiring fit in the wiring schematic???


What would the best way to wire in a switch to turn it off if I wasnt going to use the second stage?


Vanilla

[Tom McDunnah]

Matt

What are you using for a delay box?

I use a dedenbear cc-3 and use the throttle stop timers as an activation for the nitrous i am using 2 stages,also using 2 timers,works great
the cc-3 has 4 usable times and are relayed for 30 amps each

you may want to check out a search on the (dedenbear cc-3 they have some real good schemitics as to what you are trying to do
Try this
http://www.dedenbear.com/instructionswiring/cc3.pdf

Tom

[Maliboost]

I was looking for the schematic for the Digi-set timers & found thier site with them. they have quite a number of them with different features. it looks like the TDM Series is the one to use for a 2nd stage of nitrous or anything that you wanted to delay the activation.

http://www.ssac.com/standard/ff-tdr1.htm

Bob