fiberglass?

[33 fuel]

whats the best way to strip paint off fiberglass ? when they media blast fiberglass what are they shooting ? thanks

[Keith McCoy]

33 fuel there are several diffrnt ways to do this, we would like some more info on exactly what and on what kind of project you are working on???? how old is the project,how many coats of paint,etc????. as far as media blast we believe that they are small plastic or rubber pellets, realy dont recommend a stripper unless you have used it in the past because you dont want to get into the gel coat, you can use a da with 80 grit yo start and then block sand it. The way we strip a vette here is by Razor Blading it, two guys on one car can strip a vette in about an 8 hr day. If you would like a one on one just call any time sundays are ok also at 309-343-9815 ask for David. hope this helps

[33 fuel]

thanks ,glass body NITRO COUPE/promod 4 coats of paint .blue, black, red ,orange,also have a
carbin fiber front end with one coat stripping carbin fiber was my next ? the body is about 12 years old there's probably 100 pounds of paint on it.lol.not sure of gel
coat quality but body is really straight for glass few stress cracks from tire shake etc. Your right don,t want to mess up gel coat with stripper . thanks for the info.

[racer1]

Find a Soda Blaster or Razor Blade It

[33 fuel]

done sent it to blastermaster in missisauga.soda does a good job on chassis and fire wall.razor bladebody is next .

[Rocketron]

what ever you do do not chemical strip it it WILL soften the resins