need a cam

[1slow67]

Jay Allen can you build a better cam for racing???
this is my combo
67 camaro 3200 lbs
373 gear
28 inch tire
3600 9.5 converter
496 cdi
1050 carb
11.5 comp
dart 345 heads
th400 trans
traps at 6800
this is cam i have
Part Number 11-771-8
Engine 1965-1996 Chevrolet
396ci-454ci
8cyl.
Grind Number CB XR280 R-10
Description
Intake Exhaust
Valve Adjustment 0.016 0.018
Gross Valve Lift 0.646 0.653
Duration At 0.015 Tappet Lift 280 286
Valve Timing At 0.015
Open Close
Intake 34 66
Exhaust 77 29
These Specs Are For The Cam Installed At 106 Intake CL
Intake Exhaust
Duration At 0.05 242 248
Lobe Lift 0.38 0.384
Lobe Separation 110
Recommended Valve Springs 939-16

seems like it need more up top

[Jay Allen]

Limited information here, but I'll take a SWAG at it.

The convertor looks tight for racing. The camshaft looks small, very small.

What I suggest is to go to my site. The address is in my signature. Click on "CI Build Sheets". There are (3) versions there. You need the standard build sheet. Complete it and e-mail it to me as an attachment. There are directions there on how to complete the process. This will allow me to look over your information and get a feel for what you need.

Thanks.