The turbo is coming along..

[Monty Mikho]

Things so far have gone rather smoothly. Here is the latest picture of the motor...

http://www.yellowbullet.com/headers_complete.jpg

[gregh]

I'm impressed by the turbo & ducting but I'm not really sure about the corrugated fiberboard motor plates. If it was a big block I'd say OK but I think your mouse motor might be straining the limits of those plates.

Have you thought about Paper Mache? :lol:

[Monty Mikho]

LMFAO... Man you are gonna fit right in here...

[gregh]

That must be because of my kean eye & attention to fine details
.
.
.
.
.
.
.
.
.
.
Either that or smart asses are accepted & encouraged here. :wink:

[craggar]

I think it's the latter Greg.:)
Nice board Monty, should be some interesting reading over here from what I've seen on a couple other boards you go to.;)

[Jim Monson]

The cardboard will be plenty strong to hold that little weenie motor in place!

[purple66bu]

Wow Monty when you said you put the camaro on a diet you meant it!!

[Viper]

What size turbo you running monty,I have a PT-61 with 65psi injectors
Ed
Dave aka pee wee wil never make it to the track he cant afford a trailer or rent on,and it will be along time for his dad to make one from scrap parts. :lol: :lol:

[MEAN_SBC]

What are some specs on your bottom end????? I'm curious..... I'm all about spray right now, but a Turbo could be in the future. 8)

[Monty Mikho]

Well I like to do leg lifts and squats to firm up my bottom end.. That combined with the Bun's of Steel video has made my bottom end as nice as it is... Thanks for noticing.... :lol:

It's a Crower blower crank (same crank as the NOS motor). I will be using the same rods (Groden Aluminum) and change out the pistons for some lower compression. The motor will get new sleeve put in to bring the CID down. Other than that everything else is the same... Oh yeah Im gonna continue to use this junk @$$ Dart aluminum block..

Viper, that is a T-61 combinded with a T-45... :mrgreen: It's a 106 from PTE...

[Jimmy Biggs]

Monty get that thing done.....I'm out here all by myself with these fornacators......ooops sorry its not Race related :oops:

[MEAN_SBC]

We need more pics..... It's lookin pretty badass.... :shock:

[Monty Mikho]

I'll be a welding/fabricating fool for the next few days. I will update the pictures once it looks like I got something done.. :wink:

[MEAN_SBC]

What compression ratio is your setup, and how much boost are you gonna run??? :?: :D

[Dave Laurer]

My impeller is bigger than your impeller....... :lol: :lol:
http://www.laurerracing.com/temp/pro1.jpg

[Monty Mikho]

Its not the size of the impeller but the way you use it :roll:

[docoldsotherhalf]

Its not the size of the impeller but the way you use it :roll:

That's what all the guys with "small" impellers say :roll:

[Monty Mikho]

But sometimes its hard to park a bus on the side of the Grand Canyon... And no there isn't a bus big enough....

[Turbonator]

kINDA like a MAYONAISE JAR? :lol: PLITT PLITT PLITT :mrgreen:

[SNYPER]

MONTY, ANY NEW PIC'S????

[Monty Mikho]

I'm gonna work on it this week and hope to have a lot more done..

http://racefab.com/v-web/gallery/albums/Junk/turbo_plumbing_finished.jpg

[Chris Uratchko]

Monty when are you going to debut this thing? I mean c'mon... it's just a glorified hair dryer, with some aluminum plumbing for cryin out loud.... you've been screwing the dog on this thing :-D You got a life or something???

[Jim Monson]

Monty finish his car? :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :lol: :smt043 :smt046

[Monty Mikho]

The only place you will see it finished is in front of you!!! :evil:

[SNYPER]

That looks great dude!!!!!!! Are you doing all the fab work?

[Monty Mikho]

That looks great dude!!!!!!! Are you doing all the fab work?

Thanks bro.. Yeah Im doing the fab work as best as I can.. I'm not too happy with it but hopefully it will all work out..

[Jim Monson]

Yeah Im doing the fab work as best as I can.. I'm not too happy with it but hopefully it will all work out..

Already working on excuses I see. "I could have beat Monson but I'm just learning how to fabricate stuff." :smt010

[SNYPER]

I s the other tube with the v-band for the bov????

[Monty Mikho]

No the other V-band is for Jim Monson... LOL

It's actually for a twin in case I can't get the single 106 to spool quick enough. Otherwise I will switch to twin 88's...

[SNYPER]

sweet thats a great idea!!!!!!

[SNYPER]

Have you been following Bill Lutz outlaw 10.5 camaro at all????

[Monty Mikho]

No... whos Bill Lutz?

I only know Craig Pio.. <<< but doesn’t everyone? ………inside joke sorry…

[SNYPER]

Bill Lutz is on turbomustangs.com sometime...He is running a 522 ci bbc with a single 4500 carb (1500 cfm) all on alcohol with twin 88's. Makes like 2770 fwhp!!!!!
I am painting a car right now but will try to find a link later tonight.

[FLYIN4D]

Everything looks good Monty! Its definately going to be baddass when its done!

Wes

[Monty Mikho]

Thanks Wes, how is your stuff coming? any new pictures?

[gasguzzler]

I'm not sure how you figure you'll spool twin 88's easier than a 106 :roll:

If you can't spool that PT106, fix what's broke lol :-D

[Jim Monson]

Monty aint spooling anything. I think he quit racing and became Jimmy Biggs apprentice.

Funny, Monty calls me out and the quits working on the car. It's sad when you beat someone before they even make it to the track.

[Jimmy Biggs]

:shock:

[garyj]

:smt017 :smt018

[Chuck L.]

What about the up front Money?