High precision nitrous jets!!

[Monty Mikho]

All of the jets are CNC machined and the critical orifices are reamed to within a .0002 tolerance for a precise, repeatable flow. The effective hole is measured with bore gage technology that measures to 50 millionths (.00005). Quality of that resolution cannot be made by a simple drilling process. The product then goes through an ultrasonic cleaning process to remove any contaminants before marking. The marking takes place in a high frequency YAG pumped Trumph Laser Marker. The size is marked with a dark, permanent number. This process was chosen after our own experiences in the pits trying to read the sometimes faintly stamped sizes on other jets. We don't want you to take our word for it, buy a set and see the quality first hand.

http://www.hutchtrans.com/toc_nxjet.jpg

http://www.hutchtrans.com/pill%20box.jpg

For more information and pricing.. Contact Hutch at 519-453-4318 or by e-mail at Hutchtrans@rogers.com (Hutchtrans@rogers.com)

[n2oracer]

Those look alot like the Nitrous Master jets from Dave Koehler.

[Monty Mikho]

Those look alot like the Nitrous Master jets from Dave Koehler.

Im willing to bet these hold better tolerances, design and configuration..

[TubeCarz]

Im willing to bet these hold better tolerances, design and configuration..

Monty ,
I know this is an old thread from last year . I just saw it now so I wanted to coment on it .
While I know your deeply involved in the CNC world and no doubt have access to all the latest machining equipment ensuring that your parts are held to within the tolerances stated .
I was kind of shocked to see you slight someone like Dave Koehler who has been at this long enough to earn a very respected position within the performance community .
I'm confident that n2oracer also ment that the "packaging" looked the same , not the parts.
The only reason I bothered to post is out of my respect for you . I would think that your reputation alone would be all that was needed to establish a customer base. Rather than following the likes of ...well you know .
I'm done now :rolleyes:
Charlie...

[DHR racecars]

How much for a complete jet assortment for two foggers?????

[Monty Mikho]

Monty ,
I know this is an old thread from last year . I just saw it now so I wanted to coment on it .
While I know your deeply involved in the CNC world and no doubt have access to all the latest machining equipment ensuring that your parts are held to within the tolerances stated .
I was kind of shocked to see you slight someone like Dave Koehler who has been at this long enough to earn a very respected position within the performance community .
I'm confident that n2oracer also ment that the "packaging" looked the same , not the parts.
The only reason I bothered to post is out of my respect for you . I would think that your reputation alone would be all that was needed to establish a customer base. Rather than following the likes of ...well you know .
I'm done now :rolleyes:
Charlie...


It was no slam at all. Dave is a very cool guy with an excellent product. These jets are something Hutch designed and have made with special tooling. I have looked and measured these things out and yes they are dead on. Again Tubes no slam.. You know how I roll with good people

[Monty Mikho]

How much for a complete jet assortment for two foggers?????


Give Hutch a call and he will be happy to give you pricing and availability