CUBIC INCH & HEAD, NOS QUESTION

[D-MALIBU]

what is the smallest cubes that a 385 bme head will work with on a nos engine ,dragradial car around 13/1 comp , tall deck block

[D-MALIBU]

:(

[onefast68]

i would build a 565 or bigger.that big of head on a small cid motor will spin real high.

[D-MALIBU]

thanx for the input ,im thinking keeping the low end torq down because of the drag radials! ive evan thought of going bigger but keeping it a lower compression to avoid the traction issue!!