PDA

View Full Version : 9" ford

chevyman661
07-27-2006, 12:30 PM
On a 94 f body can you take 5.5 " off each side and still go with stock lower arms . :cool:
Jim Filipowski
07-27-2006, 12:33 PM
How wide is yopur housing now?
Scott @ DLS
07-27-2006, 11:28 PM
I believe 3.25" is the most.
chevyman661
07-28-2006, 11:41 AM
I was told that you can go 5.5 with coil overs and stock lower arm, The wheel i am going to put on is a 10" with 3.5" back space . Also has willwood disc brakes .
chevyman661
08-01-2006, 12:24 PM
How wide is yopur housing now?
The suspension is stock , so what ever the factory width is , then cut it to what width . On the 9" :rolleyes:
Jim Filipowski
08-01-2006, 01:42 PM
I USE A 52" WIDE HOUSING IN THE CARS THAT I BUILD.
chevyman661
08-01-2006, 04:56 PM
I USE A 52" WIDE HOUSING IN THE CARS THAT I BUILD.

Will i be able too fit a 10" rim with a 3.5" back space at that width
THANKS JIM
chevyman661
08-04-2006, 08:18 AM
Jim is the 52" axle flange to flange . Also will a stock lower control arm fit your k members 96 f body
Jim Filipowski
08-04-2006, 09:47 AM
Will i be able too fit a 10" rim with a 3.5" back space at that width
THANKS JIM

I use a 10" wheel with 5" b.c.
Jim Filipowski
08-04-2006, 09:49 AM
Jim is the 52" axle flange to flange . Also will a stock lower control arm fit your k members 96 f body

Housing end to housing end. YES.